Categories
Contact Us

Foshan Wanjia Window and Door Co.,Ltd

Address:Add: Hexi Village Entrance, Songshi Road, Shishan Town, 

Nanhai District, Foshan City, Guangdong Province, China 

Tel:+86-757-85238068

Phone:+86 13827781090

Fax:+86-757-85239770

E-mail:wanjiadoor1@163.com

News
Home > News > Content
Aluminum Window Main Timber
Sep 05, 2017

Aluminum Window Main timber

First, flat window materials

The main material of the window is generally covered in three aspects: aluminum, glass, hardware. Owners in the purchase of products, tend to pay more attention to Pingban window aluminum and glass thickness, but the requirements of the hardware is not very high, it is not comprehensive. In fact, the state of the requirements of the window is a certain standard. High-quality aluminum alloy window with the use of aluminum, its thickness, strength and oxide film are generally in line with national standards, such as the relevant provisions of the state requirements:

Flat window of the aluminum wall thickness should be not less than 1.2mm, oxide film thickness should reach 10 microns.

And tempered glass is better than ordinary glass, if the safety and durability of doors and windows to consider.

Stainless steel hardware accessories (such as screws, hinges, handles, etc.) than aluminum accessories, because such products have a higher strength and wear resistance, the use of smooth process, not easy to bad.

Second, flat window processing

In addition to flat window materials to meet the quality requirements, the processing is also very important part. As the technical content of the window is not high, the degree of mechanization is not high, most also rely on the manual installation of workers, which requires operators to have a good sense of product quality. It is important to strengthen the proficiency and product awareness of the operator during the flat window production process. High-quality flat window, fine processing, tangent smooth, consistent angle (the main frame material is usually 45 degrees or 90 degrees), in the process of splicing should not appear more obvious gaps, sealing performance, smooth switch. Low-quality aluminum alloy window, if the processing failed, there will be sealing the nature of the problem, not only leakage of wind and rain, but also in the strong wind and large external force, the glass will burst, shedding phenomenon, so that the owner caused the loss of property even The occurrence of wounding.

Third, flat window appearance

Owners to buy high-end flat window products, usually very focused on the appearance of flat window products and glass decorative patterns, and often underestimate the flat window surface composite film, this composite film is formed by artificial oxide film, with resistance Corrosion, wear resistance, high gloss, but also has a certain fire function, so the purchase of flat window products to compare more similar products. In the art of glass on the people vary, different owners choose according to their own preferences.


  • Newsletter
  • Categories
  • Contact Us

    Foshan Wanjia Window and Door Co.,Ltd

    Address:Add: Hexi Village Entrance, Songshi Road, Shishan Town, 

    Nanhai District, Foshan City, Guangdong Province, China 

    Tel:+86-757-85238068

    Phone:+86 13827781090

    Fax:+86-757-85239770

    E-mail:wanjiadoor1@163.com

  • QR Code
  • Copyright © Foshan Wanjia Window and Door Co.,Ltd All rights reserved.