Categories
Contact Us

Foshan Wanjia Window and Door Co.,Ltd

Address:Add: Hexi Village Entrance, Songshi Road, Shishan Town, 

Nanhai District, Foshan City, Guangdong Province, China 

Tel:+86-757-85238068

Phone:+86 13827781090

Fax:+86-757-85239770

E-mail:wanjiadoor1@163.com

News
Home > News > Content
Aluminum Window Special Metal Materials
Aug 11, 2017

Aluminum Window Special metal materials

Now many families in the decoration began to choose to use aluminum doors and windows, because aluminum is a special metal materials, the following brief about some of the aluminum alloy doors and windows cleaning methods.

    1. When cleaning aluminum doors and windows, do not step on the aluminum frame, do not pull the box for support. So easy to wear the doors and windows or their own accident.

    2. Aluminum doors and windows can be used soft cloth stained with water or neutral detergent, do not use ordinary soap and detergent, but can not use decontamination powder, toilet and other strong acid and alkali cleaning agent, this will corrode the profile surface.

    3. Seal the top and glass glue is to ensure that the aluminum doors and windows sealed the key structure of insulation, if the fall to be timely repair, replacement.

    4. After the rain, should immediately wipe the wet glass and window frames.

    5. Always check the connection parts of the doors and windows frame, tighten the bolts in time, replace the damaged parts. Positioning pin, wind support, to spring and other aluminum doors and windows of the vulnerable parts, to always check, regularly add lubricants to keep clean and flexible.

    6. Aluminum doors and windows in use, the action should be light, push and pull its natural; found difficult not hard pull hard push, should first rule out the fault. Fouling, deformation is the main reason for the difficulty of push and pull of aluminum alloy doors and windows, to keep the door frame clean, especially the sliding slot cleaning. Vacuum cleaner can be used to suck the tank and the door closed the fouling.

   7. often check the aluminum window frame wall joints, the long time aluminum doors and windows if loose so easy to make the whole frame deformation, so that doors and windows can not be closed, sealed. So the connection of the screw loosening should be immediately tightened, such as screw feet loose, the application of epoxy strong glue to adjust a small amount of cement seal.

  China's aluminum alloy doors and windows industry, the profile design by Europe (mainly Germany) is deeply affected, the current industry common slot is also known as the "European standard slot" name.

       And the fan slot 15 / 20mm, frame slot 14 / 18mm, and the frame fan spacing 11.5mm specifications, almost became the aluminum alloy doors and windows profiles of the Bible. The cause of this domestic situation, should be derived from the German accessories company in the domestic market expansion. After all, domestic aluminum doors and windows profiles industry is only from the late 90s of last century began.

      In recent years, the concept of domestic and outdoor system doors and windows developed rapidly, should be on the European aluminum doors and windows, especially the European system doors and windows of the profile of a thorough review to explore the nature of the slot design, to meet the long-term development of domestic doors and windows industry needs.

Frame spacing.


  • Newsletter
  • Categories
  • Contact Us

    Foshan Wanjia Window and Door Co.,Ltd

    Address:Add: Hexi Village Entrance, Songshi Road, Shishan Town, 

    Nanhai District, Foshan City, Guangdong Province, China 

    Tel:+86-757-85238068

    Phone:+86 13827781090

    Fax:+86-757-85239770

    E-mail:wanjiadoor1@163.com

  • QR Code
  • Copyright © Foshan Wanjia Window and Door Co.,Ltd All rights reserved.